The steel tanks produced from the light steel system by welding system technology can be produced in height from 4 m to 10 m according to the needs of the customers.
Steel Warehouse Construction
The steel tanks produced from the light steel system by welding system technology can be produced in height from 4 m to 10 m according to the needs of the customers. In this type of structures can be done if necessary with suspended cranes or mobile crane installation.
This type of warehouse has been installed in the domestic market with very different properties and measures and presented to the service of the customers. Among these options, the walls and the roof are insulated, and this type of insulation is determined according to the area where the building will be constructed. In this way, the products to be stored in the warehouse are protected in a healthy way. All kinds of climate can be produced according to the conditions.
The fact that steel sheets used in the production of steel warehouse buildings are produced with galvanized and welded system technology prolongs the life of the building and also enables it to be disassembled and installed many times.
Steel Hangar Construction
Steel hangar buildings can be produced in a single clearance up to 22 m, without column, using light steel system as in steel warehouses. In this way, Mod Yapı's customers can find solutions to their needs at a lower cost and better quality.
As well as steel storage, steel hangar buildings also have the possibility to use a crane as needed. It is also possible, if necessary, to be able to be covered with insulating walls and roofing coats, or only with rolled galvanized sheets if necessary, with insulating sandwich panels.
The wall and roof loops used in steel hangar buildings, roof trusses and wall columns are drawn entirely through special computer programs and loaded onto computer-aided machine lines. In this way, error in production is avoided and it is possible to have an easy assembly process on the site.